When you receive the solar motion sensor lights, please pay attention: First, press the "POWER" button to turn on the light. Then, cover the solar panel and press the "MODE" button to set the desired lighting mode. The light has 4 modes: 1. High brightness when the sensors detect motion and low brightness when there is no motion. 2. High brightness when sensors detect motion and turn off when there is no motion. 3. Motion sensors are disabled. Constant medium brightness, off at the end of the timing. 4. Motion sensors are disabled. Constant medium brightness, the light dims after time has elapsed.

Through the remote control, you can choose different sensing delay times for the solar lamps to meet different needs: - 20 seconds: Short time passing - 30 seconds: General setting - 40 seconds: Workplace/Long distance activities

The longer the delay time, the more power is consumed. It is recommended to choose 30 seconds delay time to ensure continuous lighting on rainy days.

In the "No motion sensor mode," the solar outdoor lights work from dusk to dawn when the sensor function is turned off.

The solar lamp has three levels of adjustable brightness: 100%, 80%, and 60% for all modes. It is recommended to choose 100% in the sunny season and 80%/60% in winter to ensure a longer lighting time.

The middle lamp head can be adjusted vertically, up and down by 45 degrees, and the side lamp heads can be adjusted horizontally from left to right by up to 90 degrees. The solar panel can be adjusted vertically up and down by 60 degrees. The optimum tilt angle is usually 20 degrees to make the most efficient use of available sunlight and to allow the rainwater to remove any dust buildup efficiently.

The intelamp solar security light system can illuminate an area in your backyard or garden of up to 50*50 square feet, providing all-night security and peace of mind. The impressive high lumen and long-distance sensor coverage of over 100ft enable unparalleled coverage of large areas, making Intelamp your first choice for keeping the public, you, and your family safe.

The intelamp solar sensor motion detector outside has two holes on the housing for attachment, and it comes with 2 screws, dowels, and two cable ties, allowing for two installation methods to meet your different needs.

product information: